8.4" COLOR LCD FISH FINDER
Model: FCV-587

Equipped with Furuno's latest technology, the Bottom Discrimination Function - Analyze bottom structure!

The FCV-587 now has the ability to acquire fish size and bottom structure under your boat!

 Contents:

•  FCV-587
  

• P66 Transducer

 Related Contents: 

All about Fish Finders

Features:

Bottom Discrimination Function

The FCV-587’s Bottom Discrimination feature enables the fish finder to indicate if the major component of the bottom is rocks, gravel, sand, mud. The Bottom Discrimination feature provides you with valuable information to locate rich fishing grounds, while boosting your catch of the day.

Graphic mode:

The standard graphic display mode shows the most probable bottom composition by graphic or four colors.

Probability mode

The probability display mode shows the most probable bottom composition in graph form.

Please keep the following in mind when using the Bottom Discrimination Sounder:

1) Use at a depth of 5 m - 100 m.
2) Use transducer in transom mount or thru-hull mount.
3) Set the transducer parallel to the bottom of the craft.
4) To show a consistent display of the actual bottom, set the range display of the fish finder screen to “auto”.
5) Enter the ship’s draft value.
6) Use a ship speed of 10 kn or less.
7) In some instances, bottom component indicated on the FCV-587 may differ from its actual bottom structure.
    Please read the operation manual carefully before using this feature.

ACCU-FISH™ identifies individual fish with size and fish mark function

Recognizes individual or multiple fish instantaneously
ACCU-FISH™ is a revolutionary fish size assessment function of the FCV-587.
In order to assess individual fish size, the echo strength from the fish needs to be computed and turned into fish size display on the screen. It can detect the fish size of 10 to 199 cm, in the depth of 2 to 100 m.

Circles and fish size are displayed on fish echoes. When in dual frequencies mode, you can set the mark displayed on both or either frequency screen.

Displaying fish marks

The fish mark can be utilized to display on individual fish echoes when detected. It helps beginners to identify the fish targets on the display for a more fun fishing experience. Fish mark is selectable from two types of fish symbol, circle and square. The fish symbol, displayed in two different sizes (Large: over 50 cm, Small: 10 to 49 cm), is a great help for anglers to identify fish targets. Circle and square indentify targets without hiding fish echo.

White Line function distinguishes fish from bottom

The white line function helps you distinguish bottom fish from the bottom by changing the strongest signal color to white. This function is not only useful discriminating bottom fish but is also valuable for judging fish school density. The setting range is 0%-100%, in intervals of 1%. The higher the value the thicker the line.

Configurable Alarm function (depth, fish echoes, etc.)

Post-Processing Gain Control

Share and display information on a chartplotter

*Required connection to chart plotter.

Bright LCD for excellent in sunlight viewability

Bright 800 cd/m2 LCD gives excellent readability even in bright sunlight.

Clear visibility even when wearing polarized sunglasses.

Fast transmission rate of 3,000 PRR (Pulse Repetition Rate) per minute (at 5 m depth range)

Specifications:

DISPLAY

FISH FINDER

OTHERS

Transducer P66 :

The P66 TRIDUCER® multisensor features our 50/200 kHz, dual-frequency, single-ceramic element. This hydrodynamic housing with a rounded nose reduces the turbulence under the transducer’s face for accurate high-speed readings and clear display images. 

Features:

• Depth, Speed, & Temp
• 50/200 kHz
• 600 W RMS
• Mid-Performance
• Plastic

Interconnection Diagram: